S-8770 SONY L Series DV Camcorder Battery Pack
› Li-ion battery pack of 7.2V nominal voltage
› Comparable to SONY L series DV batteries
› Display remaining power info on camera viewfinder
› 31Wh / 4.4Ah capacity
› Multiple circuit protections


SONY L series battery
Display remaining power info
S-8770 is the replacement battery for SONY NP-F770,
compatible with SONY HVR-V1/Z1/Z7, DSR-PD190,
HD1000E, etc. S-8770 can exchange digital info with the
cameras, and display remaining power info on the
camera viewfinder.


31Wh / 4.4Ah Capacity
With 7.2V nominal voltage, the S-8770 has 31Wh / 4.4Ah capacity,
and can run approx 3.5 hours on SONY HVR-Z1 camcorder when
LCDmonitor is on.


Easy Charging
The S-8770 can be charged on SWIT Dual channel charger
S-3602F or 4-ch charger LC-D421. It takes about 2 hours and
50 minutes to charge from empty to 100%.
Nominal Voltage | 7.2V |
Capacity | 31Wh,4.4Ah |
Max output power | 30W, 4A |
Compatible cameras | SONY HVR-Z1/Z5/Z7/V1; |
| SONY DSR-PD150/170/190; | |
| SONY NEX-FS100/700/EA50; | |
SONY NXR-MC2000/HD1000; | |
Dimension | 71×39×40mm |
| Charging Temperature | 0-40°C |
| Discharging Temperature | -20°C-50°C(Capacity and Max Load may decrease when operating below 0°) |
Net weight | Net 190g; With package0.2kg |
MSRP
$8222
MSRP
$8222
MSRP
$8222
1. Warranty Period
We provide 1 year conditional warranty for batteries.
2. Exclusions from Warranty Coverage
The following damages, malfunctions, failures, or safety incidents are not covered under warranty, and SWIT shall bear no liability therefor:
(1) Non-Compliance with User Manual
Operation, maintenance, or storage not in accordance with the instructions set forth in the User Manual; unauthorized disassembly, modification, or repair.
(2) Non-Compliant Charging Equipment and Practices
Use of non-original SWIT chargers or uncertified third-party charging accessories;
(3) Misuse and Physical Damage
Compression, puncture, dropping, impact, collision, water immersion, exposure to high temperatures or direct sunlight, or any other non-normal use not in accordance with the product's intended design.
(4) Use of Damaged or Defective Battery
Continued use of a battery that is damaged, leaking, or exhibiting abnormal overheating without prompt discontinuation.
(5) Natural Capacity Degradation
Reduction in battery capacity resulting from the natural aging process after a certain number of charge/discharge cycles.
(6) Improper Storage and Maintenance
Damage caused by improper storage practices that lead to extended deep discharge or prolonged zero-charge state of the battery.
(7) Force Majeure and Human Factors
Damage caused by irresistible factors (including but not limited to earthquake, fire, or lightning) or human factors.
(8) Non-Quality Defects
Any damage or breakdown not caused by the product's design, workmanship, or manufacturing quality.
(9) Liability Disclaimer
All risks and losses arising from non-compliant use shall be borne entirely by the user.






