DB-E6P Canon LP-E6P USB-C Dummy Battery
› Canon LP-E6P dummy battery
› Compatible with LP-E6, LP-E6N, LP-E6NH
› USB-C PD Power Input
› Dummy Battery Pins 8.4V/3A output
› For Canon EOS R5 / R5M2 / R6M2 / R7 / R
› For Canon EOS 5DS / 5DS R / 5D2 / 5D3 / 5D4
› For Canon EOS 6D / 6D2 / 7D / 7D2
› For BMPCC 4K / 6K; ZCAM E2C / E2N
Canon LP-E6P USB-C Dummy
DB-E6P is the Canon LP-E6P type dummy battery with USB-C port, allows you to power Canon EOS DSLR or Mirrorless cameras by external USB-C power source. The latest E6P chip is backward compatible with all Canon LP-E6 family batteries, including LP-E6, LP-E6N, LP-E6NH, and LP-E6P.
Canon EOS R5 / R5M2 / R6 / R6M2 / R7 / R
Canon EOS 5DS / 5DS R / 5DM2 / 5DM3 / 5DM4
Canon EOS 6D / 6DM2 / 7D / 7DM2
Canon EOS 60D / 70D / 80D / 90D
ZCAM E2C / E2N
BMD BMPCC 4K / 6K
Power Cameras by USB-C Source
You can use USB-C power bank, USB-C V-mount batteries or USB-C power adaptor to provide continuous power for Canon or BMPCC cameras, freeing it from the limitations of small battery capacity.
Livestreaming Video Applications
Especially during livestreaming or video shooting, using the DB-E6P Dummy Battery ensures uninterrupted power supply for extended recording, better heat dissipation, and enhanced safety and reliability.
USB-C input | 9V/12V/15V/20V 2.25A 45W |
Battery pins output | 8.4V, 3A |
Compatible battery | Canon LP-E6, LP-E6N, LP-E6NH, LP-E6P |
Compatible cameras | Canon EOS R5 / R5M2 / R6M2 / R7 / R Canon EOS 5DS / 5DS R / 5D2 / 5D3 / 5D4 Canon EOS 6D / 6D2 / 7D / 7D2 ZCAM E2C / E2N BMPCC 4K / 6K / 6KG2 / 6K PRO |
MSRP
MSRP
MSRP
We provide a 1-year conditional warranty, and the following damages/issues are not covered under warranty:
(1) Any damage or malfunction caused by use, maintenance, or installation not in accordance with the User Manual's instructions, including improper insertion into camera or power device, incorrect polarity connection, cable bending beyond recommended radius, or disassembly/repair without authorization of SWIT.
(2) Any damage caused by using third-party power supplies, batteries, chargers, or accessories that do not comply with the recommended electrical specifications, or by operating the product beyond its rated current, voltage, or load limits as stated in the technical specifications — including but not limited to melted insulation, burnt contacts, internal short circuits, or blown fuses resulting from over-current, over-voltage, or excessive load.
(3) Any damage caused by irresistible factors (such as earthquake, fire, lightning, flood, etc.) or human factors including crushing, pulling with excessive force, pinching, dropping, or improper storage in contact with sharp or heavy objects.
(4) Any damage or malfunction not caused by the product's design, workmanship, or manufacturing quality — including normal wear and tear of cable jackets, connector plating, strain relief boots, or contact spring tension.
(5) Physical damage to plugs, sockets, connector housings, locking tabs, or terminal pins resulting from violent use, improper insertion/removal, forced connection with incompatible ports, or pulling on the cable body instead of the connector is specifically excluded from warranty coverage. This includes bent, snapped, or cracked plug shells, broken latch mechanisms, separated solder joints from excessive strain, and deformed pin contacts.
(6) Electrical damage (including melted connectors, scorched dummy battery casings, deformed DC jacks, or cable insulation shrinkage) that is determined to be caused by connection to a power source or device exceeding the product's specified voltage, current rating, or duty cycle shall not be covered under this warranty.
