|
|
|
Q: When using the battery pack for the first time, what should I do? |
A
1. The lithium-ion battery has no memory effect. The battery pack can be recharged before being fully discharged.
2. To take advantage of the battery pack, you must charge and discharge the battery completely at initial use.
3. The self-discharging of the lithium-ion battery can be neglected. |
|
|
|
|
|
Q: Does SWIT battery pack and chargers compatible with other original products? |
A
1. All the V-lock battery pack can be charged on SONY original charger BC-50/100. SWIT charger 302S/304S/3802S/3004S can charge SONY original battery L40/L60/L80/75.
2. SWIT battery pack and charger can also compatible with other original charger and battery with the same mount. Click here to check the detailed battery compatibility, and here for charger compatibility (Sign in before download).
Remark: It is strongly recommended to use SWIT chargers to charge SWIT batteries for warranty purposes. |
|
|
|
|
|
Q: How long does it take to charge and discharge the battery pack? |
A
The time of charging and discharging will be according to the remaining capacity of the battery pack.
1. Click here to check the charging time (Sign in before download).
2. The time of discharging:
The time of discharging= capacity (WH)/actual load (W) |
|
|
|
|
|
Q: How to change the NP box to mounts on SONY BETACAM? |
A
1. Take off the NP box first and than screw the SWIT mount to the camera.
2. SWIT mount has the international standard power supplier for the light. |
|
|
|
|
|
Q: What is the function of the connector at the front of the SWIT battery pack? |
A
It can connect SWIT wireless receiver mount S-7002 and also the SONY original microphone C1/C2 can be attached to the mount. |
|
|
|
|
|
Q: Why when the LED shows full capacity but the battery pack can not supply power? |
A
1. The remaining capacity is showed through calculating the voltage. After the battery used for a long time, the capacity will reduce accordingly. The voltage will become high when charged which make the power look full. Actually, the capacity is very low and cant be used for long time.
2. When the battery is over discharged, it will start self-protection function. |
|
|
|
|
|
Q: Why some battery lost capacity after about one year use? |
A
The life cycle of the Li-ion battery is normally charging and discharging 500 times. If using by high frequency, the cell is frequency aging. |
|
|
|
|
|
Q: What kinds of camera SWIT products can work with? |
A
V-lock series products are applicable for SONY DVCAM, SX, MX and HD series, such as 250/370/500/570/750 . . .
A series products are applicable for Panasonic DVCPRO series, such as 200/410/610/910/915 . . . |
|
|
|
|
|
Q: Is SWIT S-8U62 compatible with EX1 camera? |
A
S-8U62 is compatible with both EX1 and EX3 camera with an extendable power cable. Pls refer to the user manual. |
|
|
|
|
|
Q: How can I fix SWIT S-2000 light on the screw thread of my camera? |
A
S-2000 has a cold shoe connector, and if you want to fix it the on the screw thream, you just need to take the cold shoe connector off. Please check http://www.swit.cc/content/2000chatu01.jpg. |
|
|